[doc] Correct install_env.sh file name (#13294)

duplicate #12209

docs/docs/en/guide/expansion-reduction.md

@@ -6,7 +6,7 @@ This article describes how to add a new master service or worker service to an e
 
 ```
 Attention: There cannot be more than one master service process or worker service process on a physical machine.
-      If the physical machine which locate the expansion master or worker node has already installed the scheduled service, check the [1.4 Modify configuration] and edit the configuration file `conf/config/install_config.conf` on ** all ** nodes, add masters or workers parameter, and restart the scheduling cluster.
+      If the physical machine which locate the expansion master or worker node has already installed the scheduled service, check the [1.4 Modify configuration] and edit the configuration file `bin/env/install_env.sh` on ** all ** nodes, add masters or workers parameter, and restart the scheduling cluster.
 ```
 
 ### Basic software installation
@@ -96,7 +96,7 @@ Attention:
   ```shell
   sudo ln -s /opt/soft/java/bin/java /usr/bin/java
   ```
-- Modify the configuration file `conf/config/install_config.conf` on the **all** nodes, synchronizing the following configuration.
+- Modify the configuration file `bin/env/install_env.sh` on the **all** nodes, synchronizing the following configuration.
   * To add a new master node, you need to modify the IPs and masters parameters.
   * To add a new worker node, modify the IPs and workers parameters.
 
@@ -222,7 +222,7 @@ If the corresponding master service or worker service does not exist, then the m
 
 ### Modify the Configuration File
 
-- modify the configuration file `conf/config/install_config.conf` on the **all** nodes, synchronizing the following configuration.
+- modify the configuration file `bin/env/install_env.sh` on the **all** nodes, synchronizing the following configuration.
   * to scale down the master node, modify the IPs and masters parameters.
   * to scale down worker nodes, modify the IPs and workers parameters.
 

docs/docs/en/guide/upgrade/upgrade.md

@@ -40,7 +40,7 @@ Execute database upgrade script: `sh ./tools/bin/upgrade-schema.sh`
 
 ### Upgrade Service
 
-#### Change Configuration `bin/env/install_config.conf`
+#### Change Configuration `bin/env/install_env.sh`
 
 - If you deploy with Pseudo-Cluster deployment, change it according to [Pseudo-Cluster](../installation/pseudo-cluster.md) section "Modify Configuration".
 - If you deploy with Cluster deployment, change it according to [Cluster](../installation/cluster.md) section "Modify Configuration".
@@ -65,7 +65,7 @@ The architecture of worker group is different between version before version 1.3
 | 1  | service1 |               192.168.xx.10 |
 | 2  | service2 | 192.168.xx.11,192.168.xx.12 |
 
-- Modify worker related configuration in `bin/env/install_config.conf`.
+- Modify worker related configuration in `bin/env/install_env.sh`.
 
 Assume below are the machine worker service to be deployed:
 

docs/docs/zh/guide/expansion-reduction.md

@@ -6,7 +6,7 @@
 
 ```
 注意： 一台物理机上不能存在多个master服务进程或者worker服务进程.
-      如果扩容master或者worker节点所在的物理机已经安装了调度的服务,请直接跳到 [1.4.修改配置]. 编辑 ** 所有 ** 节点上的配置文件 `conf/config/install_config.conf`. 新增masters或者workers参数,重启调度集群即可.
+      如果扩容master或者worker节点所在的物理机已经安装了调度的服务,请直接跳到 [1.4.修改配置]. 编辑 ** 所有 ** 节点上的配置文件 `bin/env/install_env.sh`. 新增masters或者workers参数,重启调度集群即可.
 ```
 
 ### 1.1. 基础软件安装(必装项请自行安装)
@@ -98,7 +98,7 @@ sed -i 's/Defaults    requirett/#Defaults    requirett/g' /etc/sudoers
   ```shell
   sudo ln -s /opt/soft/java/bin/java /usr/bin/java
   ```
-- 修改 **所有** 节点上的配置文件 `conf/config/install_config.conf`, 同步修改以下配置.
+- 修改 **所有** 节点上的配置文件 `bin/env/install_env.sh`, 同步修改以下配置.
   * 新增的master节点, 需要修改 ips 和 masters 参数.
   * 新增的worker节点, 需要修改 ips 和  workers 参数.
 
@@ -223,7 +223,7 @@ AlertServer          ----- alert服务
 
 ### 2.2 修改配置文件
 
-- 修改 **所有** 节点上的配置文件 `conf/config/install_config.conf`, 同步修改以下配置.
+- 修改 **所有** 节点上的配置文件 `bin/env/install_env.sh`, 同步修改以下配置.
   * 缩容master节点, 需要修改 ips 和 masters 参数.
   * 缩容worker节点, 需要修改 ips 和  workers 参数.
 

docs/docs/zh/guide/upgrade/upgrade.md

@@ -39,7 +39,7 @@ jar 包 并添加到 `./tools/libs` 目录下，设置以下环境变量
 
 ### 服务升级
 
-#### 修改 `bin/env/install_config.conf` 配置内容
+#### 修改 `bin/env/install_env.sh` 配置内容
 
 - 伪集群部署请参照[伪集群部署(Pseudo-Cluster)](../installation/pseudo-cluster.md)中的 `修改相关配置`
 - 集群部署请参照[集群部署(Cluster)](../installation/cluster.md)中的 `修改相关配置`
@@ -66,7 +66,7 @@ jar 包 并添加到 `./tools/libs` 目录下，设置以下环境变量
 | 1  | service1 |               192.168.xx.10 |
 | 2  | service2 | 192.168.xx.11,192.168.xx.12 |
 
-- 修改 `bin/env/install_config.conf` 中的 workers 参数
+- 修改 `bin/env/install_env.sh` 中的 workers 参数
 
 假设以下为要部署的 worker 主机名和 ip 的对应关系
 | 主机名 | ip |